When the power goes sideways at a business, everything stops. Registers lock up, coolers start warming, crews stand around waiting, and customers go somewhere else. Downtime like that costs a lot more than most expect, which is why businesses call Blueprint Electric for commercial electrical services in Leesburg, FL, and nearby areas. Whether you're wiring a brand new building or trying to figure out why the same breaker keeps tripping every afternoon, it helps to have someone who shows up, explains what's going on, and gets it right the first time.
Blueprint Electric is a state-certified electrical contractor based in Leesburg, FL, owned and operated by Shae and Ray, two local guys who've been doing this a long time. Our commercial focus is new construction and buildouts, which covers everything from wiring a building start to finish, to running the electrical for production home developments and custom homes, to finishing tenant spaces for restaurants, convenience stores, gyms, and retail shops. Panels, service, rough-in wiring, lighting, and final trim all fall under what our crew handles.
Here's the situation we walk into most often. A business is running fine until it isn't. Breakers start popping during the busiest part of the day, lights flicker when a compressor kicks on, or a new piece of equipment gets plugged in, and suddenly nothing on that side of the building works right. Sometimes it shows up at the worst possible moment, like the week before an inspection or an opening date.
Almost always, the cause traces back to the same thing. The electrical system was sized for what the building used to do, not what it's doing now. A convenience store wired years ago for coolers and a couple of registers gets a hot food station added, and the panel simply can't keep up. Older buildouts get done fast and cheap. Circuits end up shared where they never should've been, and the load creeps up year after year until something gives.
Fixing it starts with actually looking at the whole picture instead of swapping a breaker and calling it a day. A licensed commercial electrician from our team will walk the space with you, check what's on each circuit, run a load calculation, and tell you straight whether you need a repair, a panel upgrade, or new service coming in. From there we handle permits, schedule the work around your hours when we can, coordinate with your general contractor if there's one involved, and stay on it through inspection.
What you end up with is a system that can handle the equipment you've got and whatever you add next. Your crew stops working around problems, inspections go smoothly, and you're not paying somebody to come back out for the same issue every few months.
Below is a look at the commercial work our team takes on most often.
Ground-up commercial projects are where we do some of our best work. Our crew comes in during the planning stage, works alongside the general contractor and other trades, and handles the full electrical scope from underground and rough-in through panels, lighting, and final trim.
Fitness studios, barber shops, salons, and small retail stores each come with their own electrical quirks. Cardio equipment, styling stations, display lighting, and point-of-sale systems all need dedicated circuits in the right places, and getting that mapped out before the walls close up saves a lot of headaches later. Our team handles the layout, the wiring, and the finish work so the space is ready when you are.
Food service spaces put real demand on an electrical system, especially when hot food equipment enters the picture. Our recent projects include Jersey Mike's Subs and quite a bit of ongoing work for Circle K across the state, where we handle the remodels and equipment hookups that come with adding hot food programs. Hood systems, walk-ins, fryers, and warmers all get wired to code and sized properly from the start.
Taking a shell space or an old layout and turning it into something usable is a big part of what we do. Our crew handles the demo of old wiring, new circuit layouts, panel work, lighting, and everything else needed to get a space ready for its next tenant. Landlords and business owners get one commercial electrical service partner for the whole job instead of juggling multiple contractors.
Anything electrical on a commercial property is fair game for our team. That includes service and panel upgrades, rewires, lighting installation inside and out, generator installation, electric vehicle (EV) charging stations, troubleshooting, and repairs when something goes wrong. Having one crew who knows your building means faster answers the next time you call.
Large residential developments run on schedule, or they don't run at all. We've wired entire production communities, including 400-home projects, and our crew is set up to keep pace across multiple houses at once without letting quality slip. Builders appreciate that our scheduler and permit tech stay on top of paperwork so nothing stalls at the county.
Losing power in Central Florida is a matter of when, not if, so our generator installation service keeps your lights on, your food cold, and your AC running when the grid gives out. As an authorized Generac dealer who also installs Kohler units, we handle the permits, the transfer switch, and the inspections start to finish.
Anything that needs wire run through it falls under our electrical installation work, whether that's a custom home going up from scratch, a new hot tub circuit, or an EV charger in the garage. Our licensed electricians size everything correctly the first time so you're not calling somebody back next year.
That old panel probably wasn't built for what you're plugging into it now. Our electrical panel and service upgrades give your home or business the extra capacity it needs for new additions, hot tubs, EV chargers, or just modern appliances that draw more than anything did 20 years ago.
Opening up walls usually reveals wiring nobody's touched in decades. We handle remodeling and renovation electrical for kitchens, outdoor kitchens, attics, garage additions, barndominiums, and commercial spaces, bringing everything up to current code while we're in there.
Good lighting changes how a space feels and how much you pay to keep it lit. Our lighting installation work covers can lights and specialty fixtures indoors, plus landscape, dock, parking lot, and LED lighting outside, all sized and placed to do the job.
Something buzzing, sparking, or going dark deserves a look before it turns into a bigger problem. We handle electrical repair for homes and businesses, tracking down the actual cause instead of throwing parts at it, and we'll walk you through what we find.
There are plenty of commercial electrical contractors to pick from around here, so here's what you get when you go with us.
Our technicians handle upgrades, lighting, generators, remodels, and full buildouts, so you're not hunting for a different contractor every time the scope changes.
Electrical work can be a big line item, and financing is available to help you spread the cost without putting the project on hold.
Estimates and consultations don't cost you anything, and military members get a discount as a small thank you for their service.
Shae and Ray are Leesburg guys who still show up, which means you're dealing with the people whose name is on the truck.
Between two owners, one of them a third-generation electrician, our crew brings a track record you can actually check with the builders and business owners we work for.
Almost any commercial electrical work in Florida requires a permit, whether you're building from the ground up, finishing a tenant space, upgrading a panel, or rewiring an older building. Lake County, Sumter County, and the city of Leesburg each run their own submittal process and inspection schedule, so your timeline shifts depending on where the building sits. Your electrical contractor should pull those permits and schedule the inspections instead of handing that job back to you.
Storms roll through Central Florida hard between June and November, and lightning surges beat up panels, breakers, and anything running on a circuit board. Businesses around here lose point-of-sale systems, walk-in cooler controls, and HVAC boards after a bad one. Surge protection at the panel plus a properly sized standby generator keeps your doors open when the grid drops.
Most tenant buildouts take somewhere between two and eight weeks on the electrical end, though a small retail shop moves a lot faster than a restaurant with hood systems and hot food equipment. Permit review, inspection scheduling, and how quickly the other trades wrap up all push that number around. Bring an electrician in during planning rather than after framing, and you'll usually cut weeks off the whole project.
Nine times out of 10, somebody sized that electrical system for what the building used to do, not what it's doing now. Adding hot food equipment, new cardio machines, extra coolers, or more workstations pushes the load past what your panel and circuits can carry. Repeated tripping tells you something, and swapping the breaker without fixing the load problem usually makes things worse.
Commercial jobs call for a state-certified electrical contractor who handles commercial work regularly, not a handyman or a general contractor squeezing in electrical work on the side. Look for someone who carries the right licensing and insurance, pulls their own permits, and has finished jobs like yours, whether that's a restaurant, a retail space, or new construction.
FAQs reviewed by Shae Arce, owner of Blueprint Electric, a licensed and certified electrician in Leesburg, FL.
Give us a call and tell us what you're working on, whether that's a new build, a buildout, or a problem that keeps coming back. Estimates are free, and we'll give you an honest read on what the job takes before you commit to anything.
Address: Leesburg, FL 34748
Phone: 352-933-2732
Business Hours:
Mon - Sat: 7:00 AM to 5:00 PM
Sun: Closed
