Every trade on a jobsite depends on the one before it, and electrical sits right in the middle of that chain. When the rough-in runs late or an inspector red-tags the panel work, drywall waits, ceilings wait, and your certificate of occupancy slides further out on the calendar. General contractors, developers, and construction managers call Blueprint Electric for commercial new construction in Leesburg, FL, and nearby areas when they need a crew that reads the plans, shows up when the schedule calls for it, and passes inspection on the first try.
Blueprint Electric is a state-certified electrical contractor based in Leesburg, FL, owned and operated by Shae and Ray, who together bring three decades of combined electrical experience. Our team handles work on ground-up commercial projects across Central Florida, including offices, retail spaces, restaurants, warehouses, metal buildings, and just about any other commercial structure built from bare dirt. From preconstruction planning and underground work through service and panels, rough-in, lighting, gear, and final trim, we take the full electrical scope so the general contractor has one number to call. Our in-house scheduler and permit tech also keep submittals and inspections moving, which is usually where projects like these get stuck.
Here's what we see on job sites that get sideways. Everything hums along through site work and framing, then the electrical portion starts to slip. The service isn't set when it should be, rough-in drags on across multiple visits, the inspector fails something on the first pass, and suddenly the whole schedule compresses for the finish trades who had no part in causing it.
Nearly every time, the trouble started way back before anybody pulled a wire. Somebody bid the job off incomplete drawings, or the electrical contractor never sat down with the general contractor and the other trades to talk through conflicts before the slab went in. Conduit ends up in the wrong spot, gear is ordered late and sits in a lead time nobody planned for, and the plans and the field stop matching by week three.
The fix starts during preconstruction. A commercial electrician from our team walks through the plans with your project manager, flags potential conflicts early, and gets long-lead gear ordered early so switchgear and panels don't delay your close-in date. We coordinate our underground work with the site contractor, sequence rough-in around mechanical and plumbing to avoid fighting for space, and handle the permit submittals and inspection scheduling ourselves so the piece never lands on your desk.
The payoff shows up in your schedule. Rough-in wraps when the schedule says it will, inspections pass without a mile-long punch list, and the finish trades get the building on time. Builders around here keep bringing us back on the next one for exactly that reason.
Here's a look at the kinds of ground-up projects our crew takes on across Central Florida.
Metal buildings come with their own set of challenges, since there are no stud bays to hide anything in, and every penetration must be planned. Our crew lays out conduit runs, panel locations, and lighting before the skin goes on, which keeps the finished building clean and keeps us from cutting into something we shouldn't. Shops, storage facilities, agricultural buildings, and small industrial spaces all fall within our wheelhouse.
Ground-up office projects need an electrical system that works today and adapts when the floor plan changes in five years. Our team handles service and distribution, branch-circuiting for workstations and conference rooms, data and low-voltage rough-ins, lighting with occupancy and daylight controls, and life-safety systems.
Kitchens often consume more power than any other space in commercial construction. Hood systems, walk-in coolers, fryers, warmers, ranges, and dish machines each need dedicated, correctly sized circuits, and the Ansul shutdown has to tie in properly, or the health inspector will let you know. Having wired a fair number of restaurants and convenience stores across the state, our crew knows what these builds take before the first conduit goes into the ground.
Multi-tenant retail presents its own set of challenges, mainly around metering, house panels, and ensuring each space is ready for whatever tenant signs the lease. Our approach is to build the shell with sufficient capacity and access so that the eventual buildout goes smoothly, rather than requiring a service upgrade six months later. Landlords and developers get a package that makes leasing their spaces easier.
Not every project fits a category, and some of our favorite jobs are the ones that don't. Churches, medical offices, gyms, salons, veterinary clinics, and mixed-use buildings each carry equipment and code considerations that a standard approach misses. Bring us the plans, and we'll tell you straight what the new commercial electrical work on that building actually involves.
High-bay spaces call for a different game plan than those with drop ceilings. Our crew handles heavy service and distribution, feeders to dock equipment and material handling systems, high-bay LED lighting with the right controls, and power for compressors and shop equipment.
Storm season around here has a way of reminding everybody how much they rely on the grid. Our generator installation service covers Generac and Kohler units for homes and businesses, including the pad, transfer switch, gas hookup coordination, permits, and inspections, so you get a system that kicks on automatically when the power goes out.
New wiring in an existing home covers a lot of ground, from adding outlets in a room that never had enough to running a circuit for a hot tub, EV charger, or workshop. Our residential electrical installations and home upgrades are sized right the first time, so you won't have to call someone back when the breaker trips next summer.
Panels have a shelf life, and the one in your building was probably sized for less than you're running through it at today’s rate. Adding a hot tub, an EV charger, a new addition, or a room full of equipment usually means it's time for electrical panel and service upgrades. Our licensed electricians will run the load calculations and tell you honestly what you need.
Opening up a wall in an older building usually uncovers wiring nobody’s touched in decades. Handling remodeling and renovation electrical means we bring what’s behind those walls up to current code while adding whatever the new layout calls for, whether that’s a kitchen rewire, an outdoor kitchen, a garage conversion, or a commercial remodel.
Lighting shapes how a room feels, how safe a property is after dark, and how much you spend keeping it all lit. Our lighting installation service covers recessed cans and specialty fixtures indoors, plus landscape, dock, parking lot, and LED options outdoors, laid out to match how you actually use the space.
Flickering lights, warm outlets, a burning smell near the panel, or a breaker that won't stay set are all reasons to call. Our electrical repair team starts by identifying the actual cause of the problem rather than guessing. Then we fix it and explain what happened in plain language.
Whether you're opening a new location, finishing a tenant space, or trying to figure out why the same breaker keeps popping every afternoon, our crew handles commercial electrical services for businesses across Central Florida. Restaurants, convenience stores, gyms, retail shops, and office buildings all fall within our range, and we've done ongoing work for national brands like Circle K and Jersey Mike's.
Builders need the same house wired the same way across dozens of lots without the schedule slipping, and homeowners on a custom build need somebody who'll talk through where the switches go. Our residential new construction service covers everything here, from 400-home production communities to multimillion-dollar custom homes and barndominiums with workshops, barns, and outdoor spaces, all under one service.
Spaces change hands and change purpose, and the wiring left behind rarely matches what the next tenant needs. Before the demo starts on commercial tenant build-outs and renovations, our crew opens the panel, traces what's actually live, and runs the load against the new use, so nobody discovers a service problem halfway through a job with a lease clock running.
Utilities operate on their own schedules, and a late application can hold up an entire site for a season. Getting commercial site electrical and underground infrastructure done right means our team handles the utility paperwork, easements, and meter coordination up front, then gets trenching, conduit, and pull boxes in and inspected before the site contractor is ready to backfill.
Contractors and developers around Central Florida keep hiring us back, and these are the reasons they give.
Fifteen-plus years of work and a client list that includes national brands mean you can call around and hear how we run a job before you ever hire us.
Owners financing their own build can spread the electrical costs over time through our financing options rather than paying them all at once.
Underground, service and gear, rough-in, lighting, generators, electric vehicle (EV) charging, and final trim all come from the same crew, so nobody's coordinating three subs to finish one building.
Send us the drawings, and we'll review them, price them, and point out conflicts at no charge.
Shae and Ray still show up in person, so questions get answered by the people who actually make decisions rather than getting passed down a phone tree.
Our permit tech and scheduler stay on top of submittals, revisions, and inspection dates, keeping your project moving through the county instead of sitting in a queue.
Commercial projects in Florida go through more inspection stages than residential projects, typically covering underground, rough-in, service and gear, and final inspections, plus separate sign-offs for fire alarm and life safety systems. The Florida Building Code sets the baseline, and local jurisdictions like Lake and Sumter counties layer their own requirements on top of it. Getting a contractor who knows the local inspectors and their preferences saves real time on the schedule.
Bring the electrical contractor in during preconstruction, ideally while the drawings are still in review. Switchgear, transformers, and panels can carry lead times of several months right now, and ordering that gear late is one of the most common reasons a commercial build misses its close-in date. Early involvement also catches conflicts between the electrical plan and the mechanical, plumbing, and structural drawings, while fixing them costs nothing.
A full commercial electrical scope includes underground conduit and the utility service connection, switchgear, panels, feeders, branch circuiting, lighting and controls, fire alarm rough-in, low-voltage pathways, and final trim. Site work, such as parking lot lighting and EV charging, often falls under the same contract. Having one contractor handle the entire scope prevents the general contractor from coordinating three different subs on the same building.
Long-lead equipment, incomplete or revised drawings, and utility coordination cause most of the delays on ground-up commercial jobs. Conflicts between trades over ceiling space run a close fourth, especially when nobody sequenced the rough-in in advance. Projects that hold a preconstruction coordination meeting and submit the utility application early tend to avoid the worst of it.
Commercial construction involves gear, code sections, and inspection standards that rarely come up in residential work, including three-phase service, switchgear, emergency lighting, and fire alarm interfaces. Coordinating with a general contractor and half a dozen other trades on a construction schedule takes a different skill set than working in an occupied house. Hiring a contractor who regularly handles commercial work helps prevent a project from stalling due to issues an experienced crew would have anticipated.
FAQs reviewed by Shae Arce, owner of Blueprint Electric, a licensed and certified electrician in Leesburg, FL.
Send over the drawings, and we'll give you a real number, a realistic timeline, and an honest heads-up on anything we see coming.
Address: Leesburg, FL 34748
Phone: 352-933-2732
Business Hours:
Mon - Sat: 7:00 AM to 5:00 PM
Sun: Closed
